Bluetooth GPS Receiver(BTGP-38)

General

GPS Chip: NEMERIX GPS Module
Frequency L1, 1575.42MHz
C/A Code 1.023MHz chip rate
16 channels all in view tracking
Antenna (internal) Built-in low noise
Support standard NMEA-0183
Sensitivity To-152Bm Tracking Superior Urban Canyon Performance
Acquisition Rate Cold Start 60 sec average Acceleration<4G
Warm Start 38 sec average Motional Jerk 20m/sec
Hot Start 12 sec average
Reacquisition 1 sec
Environmental Operating Temperature-20c to + 60c

Relative Humidity 5% to 90% non-condensing
Sensibility
Search: -147dBm
Track: -152dBm
Accuracy Position
3meters CEP (50% ), without SA (Horizontal) 7 meters (90% )
Velocity 0.1m/sec.Without SA
Time + -100ns synchronized to GPS time
Daturm WGS-84 (or by demand)
Dynamic Conditions Altitude <18, 000m
Velocity <515m/sec
GPS Protocol

Default:

NMEA-0183 (V3.01) -GGA (1), GSA, GSV
RMC (1), VTG (1), Brand rate 9600 BPS
Data bit: 8, stop bit: 1 (Default)
Interface Communication Protocol
Communicate with host platform via

Bluetooth index
Bluetooth code: V1.2
Emission power: Class2 (4dBm max)
Receiving sensibility: -80dBm (Bir error rate less than 0.1)
Communication Distance: 10m typical (free space)
Communication Profile: Serial Port Profile (SPP)

Power Consumption
Working current: 45mA typical
Working voltage: 3.7V
Chargeable voltage: 5.7V

Battery
Power Built-in rechargeable 880mAh Li-ion battery
Recharge time: 2.5hrs typical
Working time: about 20hr, trackafter the charging is full
Device Size 72.8 (L) x45.8 (W) x18.8 (H) mm
2.87 (L) x1.78 (W) x0.743 (H) inch

Accessories:
Car charger (12V in, 5.7V output),
AC adaptor (5.7V output, 500mA)
User Manual